Understand the measurement
Learn what to measure and how to interpret common product dimensions.
Panduan Saiz & Padanan Cherry
Panduan Saiz & Padanan Mainan Seks, Lingerie & Kostum
Tidak pasti saiz lingerie atau dimensi produk mana yang perlu dipilih? Pelajari cara mengukur kesesuaian pakaian, fahami panjang dan diameter boleh masukkan, bandingkan kedalaman masturbator, produk boleh dipakai dan lebar nominal kondom. Gunakan panduan ini untuk mengecilkan pilihan anda, kemudian sahkan spesifikasi tepat dan carta saiz di halaman produk.
- Measure first
- Use filters to narrow
- Confirm the exact product page
Start here
What are you sizing?
Choose the product type closest to what you are shopping for.
One source of truth
How sizing works on CherryAffairs
The guide explains. Filters narrow. The product page confirms.
Narrow the catalogue
Use grouped filters such as Wearable Fit and Insertable Length to reduce the choices.
Check the exact item
Review the actual variants, manufacturer measurements and size-chart image before ordering.
!
Do not choose from the filter label alone
Broad groups make browsing easier, but brands and product designs differ. The exact product page remains the final reference.
Lingerie & costumes
How to Measure for Lingerie and Costumes
Your normal clothing label is only a starting point. Measure yourself, then compare those measurements with the chart displayed inside the exact product’s specifications.
Measure around the fullest part while keeping the tape level.
Measure directly beneath the bust. This matters most for bras and structured tops.
Measure around the narrowest part of your torso without pulling the tape tight.
Measure below the natural waist where lower-rise garments sit.
Measure around the fullest part of your hips and seat.
Especially useful for bodysuits, costumes and garments with limited vertical stretch.
| Product type | Measurements to prioritise | Check on the product page |
|---|---|---|
| Bras and adhesive bras | Bust and underbust | Band, cup and regional-size conversion |
| Babydolls and chemises | Bust, then waist | Stretch, cup range and adjustable straps |
| Bodysuits and costumes | Bust, waist, hips and torso length | Garment cut and vertical stretch |
| Panties and briefs | Waist and hips | Rise and stretch |
| Bodystockings and hosiery | Hips, height and stretch | One-size range and material elasticity |
| Men’s underwear | Waist | Pouch design and brand-specific fit |
A combined range, not proof that the garment fits every body within both labels.
A manufacturer-defined measurement range. It does not mean universal fit.
A separate extended range. Always check the displayed chart.
Plus-size groupings that vary substantially between brands.
How the filter works
Wearable Fit is a broad discovery tool
It groups products according to the actual clothing sizes stored on each product. It does not replace the brand-specific chart shown on the product page.
!
Check the chart before ordering
Brand sizing varies, and intimate products are subject to hygiene restrictions. Compare your measurements with the exact chart shown on the product page, or contact us before ordering if the fit is unclear. Review the Returns & Warranty Policy for the current terms.
Insertable toys
How to Read Insertable Length, Width and Diameter
Compare insertable length together with width, maximum diameter, shape, taper and flexibility. Total length alone rarely tells the full story.
The full product from end to end, including handles, bases or controls.
The portion intended to enter the body. It may be shorter than the total length.
The straight distance across the product at the measured point.
The distance around the product. Approximate circumference equals diameter multiplied by 3.14.
The widest insertable point, which may matter more than average shaft width.
A gradual taper or flexible material can feel different from a blunt or firm design of the same dimensions.
How the filter works
Insertable Length groups exact product measurements into broad bands
The product metafield stores the manufacturer-provided measurement. Search & Discovery then groups those values to make comparison easier.
XSUp to 8 cmCompact
S9-12 cmShort
M13-15 cmMedium
L16-18 cmLong
XL19-22 cmExtra-long
XXL23 cm+Very long
Quick converter
Diameter and circumference
Use this only as an approximate conversion. Confirm the manufacturer’s exact specification.
Chart converter
Centimetres and inches
Useful when your body measurements and a supplier size chart use different units.
Important: These bands make products easier to compare. They are not experience-level or comfort guarantees.
Masturbators
How Masturbator Size and Canal Length Are Measured
Manufacturers may report overall length, internal depth or usable canal length. Read the product specifications before comparing two products.
Usable canal length
The internal depth available for use. This may be shorter than the external product body.
Opening and stretch
Opening width, sleeve elasticity and texture affect fit differently from length.
Open or closed end
Open-ended sleeves can accommodate length differently from closed-ended products.
Suction and pressure
Adjustable air, pressure or tightness can matter more than the outside dimensions.
i
How to use the existing filter
Your Insertable Length filter groups the exact manufacturer measurements stored on each product. Treat it as a practical comparison tool, then confirm whether the listed value means internal depth, usable canal length or another measurement on the product page.
Rings & wearable toys
How to Size Rings, Harnesses and Wearable Toys
Clothing labels are not appropriate for every wearable product. Fixed rings, stretch rings, harnesses and wearable vibrators each use different fit information.
Inner diameter
Use the opening measurement, not the product’s outside width.
Material and maximum stretch
Check the manufacturer’s recommended fit range and do not assume every elastic material stretches equally.
Waist and thigh range
Look for minimum and maximum adjustable measurements.
Adjustability and placement
Check straps, magnets, garment compatibility and intended body placement.
Internal dimensions
Confirm internal length and diameter rather than relying on the overall product size.
Choose adjustable first
An adjustable design is usually easier to assess when your exact fit is uncertain.
Condoms
How Condom Nominal Width and Fit Work
Nominal width is the condom’s flat width. Different brands can use different marketing labels for similar measurements.
Nominal widthFlat width of the condom
It is not the same as diameter or circumference. Always check the exact package or product specification.
Common questions
Size and fit questions
Open a question for the practical answer.
Adakah saya perlu menggunakan saiz pakaian biasa saya?
Gunakan ia hanya sebagai titik permulaan. Ukur diri anda dan bandingkan ukuran tersebut dengan carta saiz yang dipaparkan pada halaman produk yang tepat. Saiz jenama boleh berbeza dengan ketara.
Apa maksud Satu Saiz?
Satu Saiz bermaksud pengeluar mereka pakaian tersebut untuk julat ukuran yang dinyatakan. Ia tidak bermakna sesuai untuk semua. Semak carta saiz yang dipaparkan di halaman produk tersebut.
Apa yang patut saya lakukan jika saya berada di antara saiz pakaian?
Utamakan bahagian pakaian yang paling kurang fleksibel atau paling terstruktur, kemudian semak bahan produk, keanjalan dan ciri penyesuaian. Hubungi kami sebelum membuat pesanan jika carta atau saiz tidak jelas.
Bagaimana saya mengukur diri untuk pakaian dalam?
Ukur dada anda pada bahagian paling penuh, pinggang semula jadi anda pada bahagian paling sempit dan punggung anda di sekitar bahagian paling penuh. Sesetengah coli juga memerlukan ukuran bawah dada, manakala bodysuit dan kostum mungkin memerlukan panjang badan. Bandingkan ukuran anda dengan carta yang dipaparkan pada halaman produk yang tepat.
Adakah panjang keseluruhan sama dengan panjang yang boleh dimasukkan?
Tiada. Panjang keseluruhan merangkumi keseluruhan produk. Panjang boleh dimasukkan adalah bahagian yang direka untuk masuk ke dalam badan dan mungkin tidak termasuk pemegang, pangkal atau bahagian kawalan.
Adakah lebar sama dengan diameter?
Kadang-kadang, tetapi tidak selalu. Diameter menerangkan jarak lurus merentasi bahagian bulat. Pengilang mungkin menggunakan lebar untuk bentuk yang tidak sekata atau tidak bulat, jadi periksa rajah atau konteks spesifikasi.
Panjang yang boleh dimasukkan berapa yang patut dipilih oleh pemula?
Tiada ukuran permulaan yang universal. Panjang, diameter maksimum, tirus, bentuk, fleksibiliti dan kegunaan yang dimaksudkan semuanya penting. Gunakan penapis jalur untuk membuat perbandingan, bukan sebagai jaminan keselesaan.
Bagaimana saya memilih saiz dildo atau getar?
Bandingkan panjang boleh masukkan, diameter maksimum, bentuk, tirus dan fleksibiliti bahan. Jangan pilih hanya berdasarkan panjang keseluruhan kerana sebahagian produk mungkin merupakan pemegang, pangkalan atau bahagian kawalan.
Di manakah panjang boleh masukkan dipaparkan?
Buka halaman produk dan periksa Spesifikasi. Di mana pengeluar menyediakan ukuran yang boleh dimasukkan, ia dipaparkan di situ dan digunakan untuk meletakkan produk ke dalam kumpulan penapis Panjang Boleh Dimasukkan yang berkaitan.
Bagaimana dimensi masturbator diukur?
Pengeluar mungkin menyenaraikan panjang keseluruhan produk, kedalaman dalaman atau panjang saluran yang boleh digunakan. Semak perkataan tepat dalam spesifikasi produk sebelum membandingkan produk.
Di manakah saya boleh mendapatkan carta saiz lingerie yang tepat?
Buka halaman produk dan kembangkan Spesifikasi. Produk dengan carta yang disediakan memaparkan imej carta saiz khusus jenama di situ.
Bolehkah saya memulangkan barang jika saiznya tidak sesuai dengan saya?
Produk intim tertakluk kepada sekatan kebersihan. Sila semak Polisi Pemulangan & Jaminan sebelum membuat pesanan dan hubungi kami sebelum pembelian jika maklumat saiz tidak jelas.
Still unsure?
Semak produk tepat, atau tanya kami secara peribadi
Halaman produk adalah sumber akhir untuk saiz dan ukuran tepat. Hubungi kami jika spesifikasi tidak jelas sebelum membuat pesanan.