Satisfyer - Pro 2 Replacement Climax Caps (White)

Satisfyer Pro 2 - Caps is a model-specific replacement pressure-wave cap set designed for replacing the removable silicone contact attachment on the exact compatible Satisfyer model. The five-cap pack includes two flatter and three fuller white silicone profiles, allowing the Satisfyer Pro 2 contact shape to be restored or varied. It has no motor, battery or electronic control.

Key Benefits

• Exact-model silicone attachments restore the intended fit around the pressure-wave opening
• Five replacement attachments are included in the pack
• Two flatter and three fuller cap profiles provide the exact Pro 2 assortment
• Soft silicone forms the body-contact rim
• No battery, charging or electronic control is built into the caps

1. Confirm that the model named on Satisfyer Pro 2 - Caps matches the Satisfyer device before removing an attachment from the pack.
2. Switch off the compatible device and remove its existing silicone cap gently without pulling on the surrounding housing.
3. Align the replacement cap with the pressure-wave opening and press it into its intended seated position without stretching the rim excessively.
4. Check that the attachment sits evenly and cannot shift, then test the device at its lowest setting away from the body.
5. Place the opening around the clitoris with light contact; if the seal feels uneven, switch off the device and reseat the cap before continuing.

• Remove the selected cap from the compatible device before washing it so the rim and underside can be reached.
• Wash the silicone attachment with warm water and mild soap or a compatible toy cleaner before and after use.
• Rinse the opening and underside thoroughly so no cleaner or lubricant remains.
• Air-dry the cap completely before refitting it or returning it to the pack.
• Keep unused caps away from dust, direct sunlight, heat and incompatible soft materials, and replace any cap that becomes split, stretched or permanently deformed.

Is Satisfyer Pro 2 - Caps suitable for beginners?
Yes. Satisfyer Pro 2 - Caps is easy to fit once the exact compatible Satisfyer model has been confirmed; switch the device off, seat the silicone attachment evenly and test the seal at the lowest setting.

Which device is Satisfyer Pro 2 - Caps made for?
This pack is shaped for the Satisfyer Pro 2. It should not be treated as a universal cap for another pressure-wave model.

Do the caps change the device’s power or programmes?
No. They are passive silicone contact attachments. Power, intensity levels and controls remain those of the compatible Satisfyer device.

How many attachments are included in Satisfyer Pro 2 - Caps?
Five are included: two flatter caps and three fuller caps for the Satisfyer Pro 2.