Non-porous surfaces are generally easier to clean. Many elastomer and realistic-feel formulations need more careful care.
感受、關懷與相容性
性玩具材質指南
比較矽膠、TPE、TPR、ABS、玻璃、金屬及仿真材質在一般觸感、護理、收納和潤滑劑相容性方面的差異。
The quick answer
High-quality silicone is a common easy-care starting point, but a material name alone does not establish a product's complete safety or quality. Product design, surface finish, seams, waterproofing and the manufacturer's cleaning and lubricant instructions all matter.
What matters most
Four checks before you buy
Use these checks alongside the material comparison, especially when two products use similar-sounding labels.
Seams, coatings, motors, charging ports and waterproof ratings affect care as much as the headline material.
Water-based lubricant is the safest general starting point, but the product maker's guidance should take priority.
Clean promptly, dry fully and store separately when advised so materials do not react or collect lint and dust.
Material comparison
Compare feel, care and best use
Descriptions vary by brand and formulation. Always check the exact product page before use.
| Material | Typical feel | Care and compatibility | Often suits |
|---|---|---|---|
| 矽膠 | 滑順且靈活,硬度會因產品而異。 | 高品質矽膠通常不具多孔性。清洗前請確認防水性。水性潤滑劑通常是最安全的起點;只有在製造商確認相容時,才使用矽性潤滑劑。 | 想要光滑且相對易於保養選項的買家。 |
| TPE、TPR、SEBS 和 TPU | 柔軟、有彈性,通常具有伸縮性或類似皮膚。 | 配方各異,且通常具有多孔或半多孔特性。請及時清潔、徹底乾燥,並個別存放。使用製造商核准的潤滑劑,通常為水性潤滑劑。 | 為了帶來更柔軟或更逼真的觸感而設計的套筒式自慰器、自慰套及產品。 |
| ABS 與 PC 塑膠 | 堅固、平滑,能直接傳遞振動。 | 硬質塑膠表面通常不具孔隙,但接縫和電子元件會影響清潔方式。除非產品具防水功能,否則請勿浸泡。請遵循製造商的潤滑劑使用指示。 | 紮實的產品、把手、操控與精準的震動。 |
| 私密用途玻璃 | 堅固、光滑且厚重。 | 選擇專為私密用途製造的產品。每次使用前都應檢查,如有缺口、裂痕或損壞,請停止使用。水性潤滑劑是最簡單的預設選擇。 | 偏好硬挺、平滑表面和精準壓力的買家。 |
| 不鏽鋼與產品級金屬 | 堅硬、光滑,且比大多數材料更重。 | 適當的拋光金屬可以是不透水且耐用的。僅在製造商允許的情況下使用溫度變化,並避免極端高溫或低溫。 | 適用於金屬結構的穩固壓力、重量與產品。 |
| PVC 與乙烯基 | 依配方不同,質地從硬挺到柔軟不等。 | 配方和添加劑各不相同,許多產品也具有多孔性。請遵循品牌特定的清潔指南,仔細擦乾並分開存放。 | 已確認確切配方、護理需求與預期用途的買家。 |
| 逼真觸感與專有材質 | 柔軟、有彈性,專為模仿類似皮膚的質感而設計。 | 這是一個可能包含專有彈性體的材質類別。許多此類產品需要仔細清潔、單獨存放,有時還需要重新撒粉。請遵循製造商的潤滑劑與保養說明。 | 抽插器、套套及其他以柔軟度和逼真感為首要考量的產品。 |
矽膠
滑順且靈活,硬度會因產品而異。
高品質矽膠通常不具多孔性。清洗前請確認防水性。水性潤滑劑通常是最安全的起點;只有在製造商確認相容時,才使用矽性潤滑劑。
想要光滑且相對易於保養選項的買家。
TPE、TPR、SEBS 和 TPU
柔軟、有彈性,通常具有伸縮性或類似皮膚。
配方各異,且通常具有多孔或半多孔特性。請及時清潔、徹底乾燥,並個別存放。使用製造商核准的潤滑劑,通常為水性潤滑劑。
為了帶來更柔軟或更逼真的觸感而設計的套筒式自慰器、自慰套及產品。
ABS 與 PC 塑膠
堅固、平滑,能直接傳遞振動。
硬質塑膠表面通常不具孔隙,但接縫和電子元件會影響清潔方式。除非產品具防水功能,否則請勿浸泡。請遵循製造商的潤滑劑使用指示。
紮實的產品、把手、操控與精準的震動。
私密用途玻璃
堅固、光滑且厚重。
選擇專為私密用途製造的產品。每次使用前都應檢查,如有缺口、裂痕或損壞,請停止使用。水性潤滑劑是最簡單的預設選擇。
偏好硬挺、平滑表面和精準壓力的買家。
不鏽鋼與產品級金屬
堅硬、光滑,且比大多數材料更重。
適當的拋光金屬可以是不透水且耐用的。僅在製造商允許的情況下使用溫度變化,並避免極端高溫或低溫。
適用於金屬結構的穩固壓力、重量與產品。
PVC 與乙烯基
依配方不同,質地從硬挺到柔軟不等。
配方和添加劑各不相同,許多產品也具有多孔性。請遵循品牌特定的清潔指南,仔細擦乾並分開存放。
已確認確切配方、護理需求與預期用途的買家。
逼真觸感與專有材質
柔軟、有彈性,專為模仿類似皮膚的質感而設計。
這是一個可能包含專有彈性體的材質類別。許多此類產品需要仔細清潔、單獨存放,有時還需要重新撒粉。請遵循製造商的潤滑劑與保養說明。
抽插器、套套及其他以柔軟度和逼真感為首要考量的產品。
Before checkout
A five-point material checklist
Read the exact listing
Look for a specific material and maker guidance, not only broad terms such as “body-safe”, “premium” or “realistic”.
Check the whole construction
Review seams, coatings, charging ports, removable sleeves and waterproofing before deciding how the product can be cleaned.
Match the lubricant
Start with water-based lubricant unless the manufacturer confirms another type is compatible with the product.
Plan cleaning and drying
Do not immerse an electronic product unless it is rated for that use. Dry all surfaces and openings fully before storage.
Inspect and store separately
Stop using damaged products. Separate storage can reduce lint, colour transfer and material-to-material reactions.
Turn information into a choice
Ready to compare products?
Use Find Your Match for a focused shortlist, then confirm material and care on the selected product page.
Complete the setup
Lubricant, cleaning and product selection
Use the specialist guide that answers your next question instead of starting the research again.
Compatibility
Choose Your Lube
Match lubricant type to body use, condoms and product material.
Care
Cleaning Guide
Learn the basic cleaning, drying and storage process before first use.
Product selection
Find Your Match
Compare a smaller set of recommended products by stimulation and intended use.
Material questions
Frequently asked questions
矽膠與 TPE 或 TPR 有什麼不同?
高品質、無孔配方的矽膠通常更光滑,也更容易保養。TPE 和 TPR 是廣泛的彈性體類別,觸感可能更柔軟或更逼真,但其多孔性和保養需求各不相同。請務必遵循產品的確切使用說明。
對性玩具來說,「多孔」或「非多孔」是什麼意思?
非多孔表面通常較少有水分和殘留物能滯留的縫隙,因此更容易清潔。多孔和半多孔材質可能需要更仔細的清潔、乾燥及個別收納。結構、接縫和電子元件也會影響保養方式。
任何潤滑劑都可以搭配任何玩具材質使用嗎?
不一定。水性潤滑劑是許多產品最安全的一般起點,但應以製造商的指示為優先。有些矽性潤滑劑可能會影響某些矽膠產品,而男性自慰器材質可能有品牌特定的使用要求。
「仿真觸感材質」是指某一種特定材質嗎?
不。這是一種觸感或行銷分類,可能包含不同的專有彈性體和配方。請查閱確切的產品材質、核准使用的潤滑劑、清潔方法及存放說明,不要只依賴這個術語。
性玩具應該分開存放嗎?
分開存放是明智的預設做法,尤其適用於柔軟彈性體、PVC、仿真質感產品,以及配方不明的物品。這樣可以減少棉絮沾附、顏色轉移及材料之間的反應。請先確保每件物品都完全乾燥。
如果玩具變得黏膩、龜裂或損壞,我該怎麼辦?
停止使用。表面變化、裂縫、缺口、塗層剝落或持續異味可能表示產品已損壞或劣化。如有疑問,請查看製造商的說明,並聯絡零售商或製造商。
Keep the journey simple
Choose the product first, then confirm its care
The first-time guide explains the buying decision. Find Your Match narrows the catalogue. This page helps you verify material, lubricant and care before purchase.